Home | Tell a Friend | About Us | Site Map | Customer Service | Live Chat| Shopping Cart

Board and Batten Shutters

Click on Images to Enlarge.

board and batten shutters board and batten shutters

Section Detail
diagram of boad and batten shutters

  • Materials - Board and Batten Shutters are fabricated of 1 inch thick (25 mm) high density solid core composite material machined. Panel and Cross Bucks are constructed high-density PVC composite materials. Reinforced with 1" x 1/2" (outside dimension) aluminum tubing imbedded within the panels 7/8" from either side.

  • Paint Finish - Two-part, automotive-quality, acrylic-urethane finish with hardener.

  • Size Restrictions - Panel Width: 9" to 48", Length: 12" to 96"

  • Notes: Hinges are usually applied to the back of the board and batten shutters. They are only visible in their entirety when the shutter is in the closed position.

    Shutter swing is 3"; be sure to check for proper clearance (i.e., lamps, fixutures) when the board and batten shutter is in the open position.
Start Here
Products
Pricing & Ordering
Shutter Accessories
General Information