Did you know that you can install exterior window shutters on your own? That’s right. Exterior shutters are excellent additions to your home as they elevate the appeal and ensure you get the privacy you need. Taking up a home improvement project might seem like biting off; more than you can chew.

However, with the right tools and instructions, the project will most likely turn out to be a cathartic experience. Have you recently replaced your old exterior shutters with modern window solutions? Did you know you can use old shutters for decorative purposes within your home? Exterior window shutters are excellent materials for countless DIY projects.

You can turn the shutters into stunning furniture pieces. Purchasing exterior window shutters From a reliable dealer allows you to use them even after the materials are old. DIY projects are fulfilling experiences if you involve your family. Stick around to find out how to use window shutters.

Choose the Type of Shutters You Want

Before you embark on your DIY project, you have to figure out the type of shutters to use. Carry out in-depth research to find out which shutters go well with your home. Common types of outdoor window shutters you can consider include;

  • Bermuda(Bahama) shutters
  • Plantation exterior shutters
  • Raised panel shutters
  • Louvered shutters
  • Board and Batten shutters

 Ensure you seek a professional’s help in choosing the shutters you want to buy. Remember that each exterior window shutter has a distinct appearance which will have a given impact on your home’s appearance. Consult your home’s architecture if you don’t understand how to maintain your home’s style.

Well, take all the time you need to decide on the material you prefer. You should base the suitability of the material on compatibility and durability.

Purchase all the Tools You Need

For your project to be a success, you need to have all the tools required for installation. Choosing the type of exterior window shutters helps you decide on the tools you’ll need to purchase. Ensure you don’t begin your project before you get all the tools you require.

Once you have your tools, you can take up measurements for all the windows you’ll be working on. Ensure that your measurements are precise and accurate to avoid wasting material. Besides, inaccurate measurements mean you’ll end up with a sloppy job.

Taking your time to ensure all measurements are correct saves you the time you’d need to correct any errors. You’ll need to take into account the length, width, and height of your walls surrounding the frame of each window.

Work on the Frame

Since though this is a DIY project, you’ll need to put the frame together on your own. Ensure you go with products that have a warranty as this guarantees the durability of the material.

This is where instructions come in. If followed to the latter, you won’t have a problem piecing the materials together. Every exterior window shutter manufacturer provides an elaborate connecting system that’s easy to follow.

Don't bend the pieces against the edge of your working surface as this compromises the structural integrity of your frame. Always look out for labels so that you don’t connect pieces in the wrong joints.

Fix the Shutter Frame into Position

Ensure your assembly is even before fixing it into position. Lift your assembled frame off your working surface and place it against the window. Identify where the screw holes are and align them with your frame.

If you’re working with frames without pre-drilled holes, you’ll need your drill to make screw holes. Remember not to fasten the frame since you still need to hang your shutter panels.

Hanging Your Shutter Panels

This step can be a bit confusing because shutter panels tend to look alike. Purchasing shutters From a trusted dealer ensures you have labels to guide you. Manufacturers provide hinge pints to ensure your panel is correctly reinforced.

Ensure the slat close upwards. Once you make sure everything is correctly aligned, you can fix the screws at the bottom of the frame.

Test Your Shutters

I bet you’d want to find out if your DIY installation was successful. Test out your shutters to make sure they’re functioning as they should. All you need to do is to open and close the shutters to see if there are any issues. Ensure the panel lines up correctly and that there’s no gap between the frame and the wall.

How to Repair Exterior Window Shutters

It is no secret that your outdoor house shutters are exposed to extreme weather conditions. For them to deliver optimum functionality, you need to ensure they’re in tiptop condition. Repairing your window shutters as soon as you notice damage saves you From costly replacements.

Some of the damages exterior window shutters sustain include;

  • Warping and cracking
  • Wood rot
  • Paint peeling
  • Hinge and joint problems

In case of any damages, find out first if the products have a warranty. Calling in a professional From the dealer you purchased From saves you a great deal of money. If you have no warranty, consult with a reputable dealer for directions.

Repurposing Window Shutters

Old window shutters can be repurposed into whatever you want if you put your mind to it. You can use your old shutters to change up the décor of your home. Window shutters can be used to make a customized closet, a bookshelf or a vertical garden for small indoor spaces. All you need is a comprehensive guide to guide you.

Add Color to Your Window Shutters

Homes are huge investments. That is why you should do all you can to pamper your home. Adding color to your window shutters gives you home with the pop it deserves.

Among the areas you should include colored shutters is your living room. This is an area you and your family spend a lot of time. Adding a pop of color also makes your home welcoming. Always work with trusted dealers so as they use environmentally friendly paint.

Conclusion

Window shutters are amazing additions to your home. Choosing the appropriate style ensures that you elevate your home's appearance. Contact us today to find out what your options are.