The best shutters also improve privacy and add aesthetic appeal to your home. If you have been looking for a versatile idea to add a stylish look to your house, window shutters will do the trick. The best thing about these furnishings is that you can do it yourself.

A DIY shutter installation might sound complex but with the right tools and instructions, you will find it easy. This article looks at some of the crucial DIY tips for shutter installation to guarantee a safe and successful home improvement and remodeling project. Read on...

1. Consider the Type Of Shutters You Want

It is advisable to carry out extensive research to identify the most suitable shutters for your home. Some of the most common types include.

  • Raised panel shutters
  • Louvered shutters
  • Board and Batten (BnB)
  • Bahama shutters/ Bermuda shutters
  • Shaker style shutters
  • Plantation exterior shutters
  • Café-style shutters
  • cut-out design shutters
  • Scandinavian shutters
  • Combination shutter of two or more shutter styles

Each of these shutter styles has a distinct look and you need to understand where it works best. You need to consider your home’s architectural style to choose a style that suits it. More importantly, you have to choose the shutter materials.

The most popular shutter materials include wood, MDF, vinyl, and aluminum. Again, you have to learn about the pros and cons of each of these materials to determine their suitability for your home .

2. Get the Necessary Materials and Tools

Once you have identified the type of window shutters for your home, it is advisable to gather all the necessary materials and tools. The best DUY guides will also include the tools and anything else you need to pull off the perfect shutter installation project. For wood shutters, these tools and materials include:.

  • Drill with 1/4” drill bit
  • Small hammer/mallet
  • Spirit level (BnB)
  • Measuring tape
  • Pencil
  • Plantation exterior shutters

3. Take The Measurements

The most important step in window shutter installation is taking the correct measurements. This will determine the quality of the job you do. By taking the measurements, you will get the correct size of shutters to use.

If you take wrong measurements, you will have to correct the problem later and this leads to time wastage while also ruining the shutter materials. Ultimately, the quality of Exterior shutterstakes a hit if you don’t take the correct measurements.

Start by measuring the measured the depth, width, and height of the walls that frame your window. At this point, you should have in mind the type of mounting you want, frame type, louver sizes, and panel configurations among other things.

4. Put the Frame Together

If you want a perfect DIY installation job for your window shutters, you should order the frames and other hardware from a reputable dealer. This guarantees the quality of materials you receive and these come with a warranty. Once you receive the different shutter materials, it is time to get down to work.

Putting the frame together shouldn’t take you a lot of time because you have the instructions provided by the manufacturer. The shutter frame should come in four pieces and you should use the connecting system provided. Make sure you work on the frame on a flat surface. Avoid losing any hardware because this could lead to structural weakness in the frame.

Confirm the frame is even by gently tapping on the corners with a small hammer or mallet. These parts come with labels to make the job easier for you and unless you fix parts in the wrong place, putting the frame together shouldn’t trouble you.

5. Mount The Shutter Frame

After confirming the shutter frame is firm and even, it is time to mount it. You should start by marking where the screws will go and drilling holes for quick installation. The top part of the frame comes first and you should hold it in place as you insert the screws using a drill. Don’t fix the bottom section of the frame yet.

6. Hang The Shutter Panels

It is now time to hang the shutter panels but before doing this, you have to determine the right panels for the particular frame. Look for labels on the frame and panels to avoid confusion. Use hinge pins provided by the manufacturer to install the panels. Make sure the shutter slats close upward at this point.

Take time to adjust the panels to ensure they fit perfectly on the shutter frame. After confirming everything aligns well, go ahead and fix the screws at the bottom of the frame. Make sure all the screws provided go to the right place as instructed by the manufacturer.

7. Test The Shutters

After the DIY installation of exterior shutters, it is important to test them out to determine the success of your project. Open and close the shutters and closely inspect for any problems. If you notice any gaps between the wall and the shutter frame, use decorators caulk to fill it. If the panel doesn’t line up, you can unscrew part of the frame and play around with its positioning until it works perfectly.

With these steps, it is possible to pull off a magnificent DIY exterior window shutters project. You don’t require any training of expertise to do it right. However, you have to follow the manufacturer’s instructions to the letter to avoid glaring problems after installation. It is also advisable to get all the tools you need and if possible, get someone to assist you as this makes your work easier and averts any accidents.

Always make sure you mark the exact position where the shutter frame will go and mark the location of the hardware before installation. Ready for a DIY shutter installation, use these skills and transform your home.